China 26mm Metal Cutted High Precious Low Noise Planetary Gearbox with high quality

Solution Description

Product overview:

Planetary gearheads characteristic very high power transmission with a quite limited style. The modular design and style and the scaled levels offer the basis for a buyer-particular solution. Metallic parts make use in a extensive range of purposes feasible.At the very same time they have a very compact kind, low excess weight, and superb efficiency. Self-centering world gears ensure a symmetrical drive distribution. The ring equipment also kinds the housing of the gearbox. The gearbox output shaft is supported in 2 ball bearings so that it can face up to high axial and radial hundreds. The gearboxes are personalized, e.g. for use in particularly minimal ambient temperatures, or as substantial-power gearboxes with bolstered output shafts, or with particular lubricants for extremely lengthy support life.

Common programs:
 

  1. ATM in bank,Robotic,Door-lock,Vehicle shutter, USB supporter,Slot equipment,Income detector, Coin refund units
  2. Currency rely equipment, Towel dispensers, Automated doors,Peritoneal machine
  3. Automatic Tv set rack, Workplace equipemt ,Household appliances,Computerized, health-related screwdriver, robotic arms
  4. Lab stirrer, Cosmetology instrument, Health-related units, Hairdressing tools,Cameras,Health-care articles
General & Standard info/
NO. Description/ Value/
1 Outer diameter/ Φ26mm
2 Type of Gearbox/ Planetary/
three Housing materials/ Metal/
four Type of enamel/ Straight/
five Teeth materials/* Steel/*
6 Output shaft substance/ Stainless Steel/
7 Bearing at output/ Ball Bearing/
eight No-load backlash/ ≤2°
9 Number of levels availability/ 1,2,3,4
ten Axial engage in/ ≤0.1 mm
eleven Radial enjoy/(8mm from flange/10mm) ≤0.03 mm
12 Dynamic Max. axial load/ ≤25N
13 Max. pressure for push fits/ ≤50N
14 Max. radial pressure/(8mm from flange/10mm) ≤70N
fifteen Operating temperature assortment/ -40°C to +120°C
16 Operating relative humidity/ 20%RH to ninety%RH
* Typically the 1st stage gears to motor produced by plastic in buy to decreasing sounds if stage amount a lot more than 1.
* 1,.
 
Technical Information/
NO. Description/ Value/
17 Number of equipment levels/ one 2 three four
eighteen Reduction ratio/ three.7:one
four.3:1
five.2:one
The ratio can be 1 of mixtures of 3  ratios
19 Max. constant input speed/ 8,000rpm 10,000rpm fifteen,000rpm fifteen,000rpm
20 Max. intermittent input speed/ 10,000rpm 15,000rpm 20,000rpm 20,000rpm
21 Max. steady torque/ 500mNm 750mNm two,000mNm two,500mNm
22 Max. intermittent torque/ 750mNm 1,100mNm 3,000mNm three,750mNm
23 Direction(from the driver to output) /() Same Same Very same Very same
24 Max. efficiency/ ninety% eighty one% seventy three% sixty five%
25 Weight with out motor/(g) fifty sixty two 75 89
26 L2[mm]=Length without motor/ 21.5 thirty.5 39.five 48.5
27 L1[mm]=Size with motor/ The total size of gear motor depends on the motor specified.
.
             
Reduction ratio Motor pinion specs/
Substance Variety of teeth Size Gap diameter
5.2:1 / 19.2:1 / 22:1 / 27:1 / 99:1 / 115:1 / 139:1 / 721:one Steel/

Copper/

z=11 L=five Pict

        Φ2.
4.3:1 / sixteen:1 / eighteen.3 / 79:1 / 218:1 / 337:1 z=fourteen L=5
3.7:1 / thirteen.7:1 / 51:1 / 189:1  z=seventeen L=5

Miscellanea:
 

  1. You should get in touch with us to get in depth requirements and drawings for the geared motor you are hunting for.
  2. We are able to design and generate the geared motor you specified.(OEM & ODM).
  3. Please pay a visit to us at silent to get more data.

 

US $10
/ Piece
|
5 Pieces

(Min. Order)

###

Application: Motor
Function: Change Drive Torque
Layout: Three-Ring
Hardness: Hardened Tooth Surface
Installation: Horizontal Type
Step: Three-Step

###

Samples:
US$ 10/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:

###

General & Basic information/
NO. Description/ Value/
1 Outer diameter/ Φ26mm
2 Type of Gearbox/ Planetary/
3 Housing material/ Metal/
4 Type of teeth/ Straight/
5 Teeth material/* Steel/*
6 Output shaft material/ Stainless Steel/
7 Bearing at output/ Ball Bearing/
8 No-load backlash/
9 Number of stages availability/ 1,2,3,4
10 Axial play/ 0.1 mm
11 Radial play/(8mm from flange/10mm) 0.03 mm
12 Dynamic Max. axial load/ 25N
13 Max. force for press fits/ 50N
14 Max. radial force/(8mm from flange/10mm) 70N
15 Operating temperature range/ -40°C to +120°C
16 Operating relative humidity/ 20%RH to 90%RH
* Normally the 1st stage gears to motor made by plastic in order to reducing noise if stage number more than 1.
* 1,.
 
Technical Data/
NO. Description/ Value/
17 Number of gear stages/ 1 2 3 4
18 Reduction ratio/ 3.7:1
4.3:1
5.2:1
The ratio can be one of combinations of 3  ratios
19 Max. continuous input speed/ 8,000rpm 10,000rpm 15,000rpm 15,000rpm
20 Max. intermittent input speed/ 10,000rpm 15,000rpm 20,000rpm 20,000rpm
21 Max. continuous torque/ 500mNm 750mNm 2,000mNm 2,500mNm
22 Max. intermittent torque/ 750mNm 1,100mNm 3,000mNm 3,750mNm
23 Direction(from the driver to output) /() Same Same Same Same
24 Max. efficiency/ 90% 81% 73% 65%
25 Weight without motor/(g) 50 62 75 89
26 L2[mm]=Length without motor/ 21.5 30.5 39.5 48.5
27 L1[mm]=Length with motor/ The total length of gear motor depends on the motor specified.
.
             
Reduction ratio Motor pinion specifications/
Material Number of teeth Length Hole diameter
5.2:1 / 19.2:1 / 22:1 / 27:1 / 99:1 / 115:1 / 139:1 / 721:1 Steel/

Copper/

z=11 L=5 Pict

        Φ2.0
US $10
/ Piece
|
5 Pieces

(Min. Order)

###

Application: Motor
Function: Change Drive Torque
Layout: Three-Ring
Hardness: Hardened Tooth Surface
Installation: Horizontal Type
Step: Three-Step

###

Samples:
US$ 10/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:

###

General & Basic information/
NO. Description/ Value/
1 Outer diameter/ Φ26mm
2 Type of Gearbox/ Planetary/
3 Housing material/ Metal/
4 Type of teeth/ Straight/
5 Teeth material/* Steel/*
6 Output shaft material/ Stainless Steel/
7 Bearing at output/ Ball Bearing/
8 No-load backlash/
9 Number of stages availability/ 1,2,3,4
10 Axial play/ 0.1 mm
11 Radial play/(8mm from flange/10mm) 0.03 mm
12 Dynamic Max. axial load/ 25N
13 Max. force for press fits/ 50N
14 Max. radial force/(8mm from flange/10mm) 70N
15 Operating temperature range/ -40°C to +120°C
16 Operating relative humidity/ 20%RH to 90%RH
* Normally the 1st stage gears to motor made by plastic in order to reducing noise if stage number more than 1.
* 1,.
 
Technical Data/
NO. Description/ Value/
17 Number of gear stages/ 1 2 3 4
18 Reduction ratio/ 3.7:1
4.3:1
5.2:1
The ratio can be one of combinations of 3  ratios
19 Max. continuous input speed/ 8,000rpm 10,000rpm 15,000rpm 15,000rpm
20 Max. intermittent input speed/ 10,000rpm 15,000rpm 20,000rpm 20,000rpm
21 Max. continuous torque/ 500mNm 750mNm 2,000mNm 2,500mNm
22 Max. intermittent torque/ 750mNm 1,100mNm 3,000mNm 3,750mNm
23 Direction(from the driver to output) /() Same Same Same Same
24 Max. efficiency/ 90% 81% 73% 65%
25 Weight without motor/(g) 50 62 75 89
26 L2[mm]=Length without motor/ 21.5 30.5 39.5 48.5
27 L1[mm]=Length with motor/ The total length of gear motor depends on the motor specified.
.
             
Reduction ratio Motor pinion specifications/
Material Number of teeth Length Hole diameter
5.2:1 / 19.2:1 / 22:1 / 27:1 / 99:1 / 115:1 / 139:1 / 721:1 Steel/

Copper/

z=11 L=5 Pict

        Φ2.0

What is a Planetary Gearbox?

A planetary gearbox is a mechanical device in which the teeth of a planet mesh with the teeth of its sun or ring. The number of teeth and the spacing of planets will determine whether the teeth mesh correctly. In this article, we will learn more about planetary gearboxes. Besides understanding their working, you can also learn how to design your own. Here are some examples:

planetary gearboxes

If your car has an automatic transmission, then a planetary gearbox is the type you have. It is possible to find out if you have this type of gearbox by consulting the owner’s manual, calling the service department of your car’s manufacturer, or conducting a search using your favorite search engine. However, planetary gears are more complex and have many more components than standard gearboxes. The following information will explain more about this type of gearbox.
Planetary gearboxes use three different gear types to transmit torque. The sun gear sits in the center of the gear assembly, while the other gears rotate around it. A carrier connects the two gears, and is designed to set the spacing between them. When the gears are rotated, the carrier will spin, enabling the entire assembly to work together. The carrier also incorporates the output shaft. For this gearbox to work effectively, it must meet the application’s requirements.
There are three main types of planetary gearboxes: the basic model is highly efficient and transmits 97% of the power input. The earliest models are not complex, but they do have some key differences. Some of these differences make them ideal for various applications. For example, a planetary gearbox can operate in alternating and continuous operation, with the output support having internal grooving. Some designs have more than one output shaft, allowing the user to choose the configuration and torque that is best for their application.
One of the main differences between a planetary gearbox and a conventional one is the way the planetary parts move. A planetary gearbox may have multiple axes for increased torque. A planetary gearbox can provide a torque up to 113,000 N.m. by rotating its maximum teeth simultaneously. They are the ideal choice for space-constrained applications. For instance, a car with small spaces can install one with ease.
A planetary gearbox’s gear ratio is determined by the ratio of the sun gear to the ring gear. The number of teeth on the sun gear is a way to adjust the gear ratio. Smaller sun gears result in larger planetary gear ratios, while larger ones cause a decrease in torque. The ratio between planetary gears ranges from 3:1 to 10:1, with the lowest ratio being three. The greatest possible ratio is 10:1.
A planetary gearbox has many benefits. The compact design makes them a more efficient choice for small motors and is advantageous for servo functions. Planetary gearboxes have low inertia, which is an important factor, especially in servo applications, since the inertia of the gearbox adds to the motor’s load inertia. The planetary gearboxes are typically lubricated with grease or oil, so you don’t need to worry about re-lubrication or maintenance.
planetarygearbox

planetary gearboxes with output shaft

The advantages of planetary gearboxes are numerous. They are widely used in many applications, from automobiles to medical equipment, goods & personnel lifts to machine tools. They are also used in derrick & dockyard cranes and slewing drives. These gearboxes are available in various sizes and shapes, ranging from small to extremely large. There are many different types, and each is designed to suit its intended use.
The LP generation 3 gearhead series combines maximum quality with economic precision in a low-backlash planetary gearbox. The output shaft version is especially suited for high-speed, highly dynamic cyclic operation. Another version is the SP+ HIGH SPEED. The SP+ high-speed version is designed to achieve maximum speeds while in continuous operation. If you need a planetary gearbox with an output shaft, look no further. It is the best choice for many applications.
As the name suggests, a planetary gearbox incorporates planetary parts and an output shaft. The outer gears (also called the planetary gears) are connected by a carrier to the output shaft. The carrier is then connected to the output shaft by a ring. There are two or more planetary gears inside the planetary gearbox. Each gear is connected to a carrier, which is connected to the output shaft.
An epicyclic planetary gear train can be assembled so that the planet gear rolls around the sun gear. In the wheel drive planetary gearbox, the planetary gears are grouped over the housing to optimize the size and weight of the system. The planetary gear train can handle torques as high as 332,000 N.m., with the ring gear being fixed while the sun gear is movable.
Another advantage of a planetary gearbox is that it uses many teeth at once. This allows for high speed reduction and high torque transmission, and it is extremely compact. Planetary gearboxes with output shaft are ideal for space-constrained applications. Their compact size and minimal weight make them a popular choice in many industries. They are also known as epicyclic gears and are used in many different types of machines.
A planetary gearbox can have three components. A central sun gear, an outer ring known as the inner gear, and an output shaft. These three components are linked by a carrier. The carrier rotates so that the input and output gears are in sync. They also have a standard gap between the gears. The carrier also acts as the output shaft. They can be used to create small machines, such as a bicycle acceleration hub.
planetarygearbox

planetary gearboxes with integer number of teeth

When designing a planetary gearbox, one must determine the amount of tooth count. This figure is known as the mesh load factor Kg, and is based on the normal tooth forces that are generated in each mesh. The number of planets, the error in the gear design, and the rigidity of the housing all affect Kg. Depending on the type of application, Kg can be calculated by using different standards.
In a typical planetary gearbox, the ratio is an integer number, and the lowest is 3:1. At a ratio of 10, the sun gear is too large and the sun wheel is too low to provide a sufficient amount of torque. In most cases, the ratio is an integer value, and the teeth are evenly spaced. The gear mesh is then balanced to grade 2. The carrier is measured three-dimensionally to detect the accuracy of the planet pin hole in the carrier.
In the simplest case, each planetary gear mesh produces a dynamic signal at its mesh frequency. These signals can cancel or reinforce in various ways. A helix angle, however, introduces axial forces into the gear mesh, which can be cancelled or reinforced in the same way as torques. As the helix angle is an integer number, this planetary gear model does not necessarily require infinite precision.
The resulting motion period is measured in rotational angles. This figure can be used to determine fault diagnosis and calculate the minimum data length required. It can also be used to calculate the kinematic motion of a faulty planet gear tooth. It is important to note that fault-mesh motion is not instantaneous, and therefore, it requires a sufficient amount of time to fully mesh a faulty planet gear.
The load-share factor is similar to that of spur and helical gearboxes, and can be used to calculate dynamic load sharing. When the load share factor is low, the individual gear meshes are slightly loaded. Deflections can vary, especially with high-precision gears. Therefore, the design process should incorporate the tolerance chain. This will ensure the correct ratio of gear mesh.
A planetary gearbox is a type of planetary gear system that is used in motors. It has a sun gear at the center and a set of outer gears. Each gear turns according to its axis around the sun. They are interconnected by a ring component and are connected to each other through a carrier. The carrier also includes the output shaft. And since the sun gear is centered, the mesh is standard.
As an added benefit, planetary gearboxes have sliding surfaces, which reduce noise and vibration. Despite the high-quality of planetary gearboxes, it is important to properly lubricate them to avoid wear and tear. CZPT uses CZPT. In order to make the planetary gearboxes last a long time, the lubricant is usually incorporated in the planetary gearbox.

China 26mm Metal Cutted High Precious Low Noise Planetary Gearbox     with high quality China 26mm Metal Cutted High Precious Low Noise Planetary Gearbox     with high quality
editor by czh 2023-03-27

Recent Posts