China Good quality 36mm Planetary Gearbox 120rpm 24V 12V DC Gear Motor High Torque Low Rpm Motors for Robots with Best Sales

Penerangan Produk

Parameter Produk

Model:  ZWBMD571571-168

• Voltan Dinilai: 3.0V
• Kelajuan Tanpa Beban: 98 rpm
• Arus Tanpa Beban: 80mA
• Kelajuan Beban Dinilai: 86 rpm
• Arus Beban Terkadar: 220mA
• Tork Beban Dinilai: 106 gf.cm
• Tork Dinilai Kotak Gear: 2,000 gf.cm
• Instant Torque of Gear Box: 6,000 gf.cm
• Overall Length L: 34 mm
• Gear Box Length L1: 19 mm

Spesifikasi di atas hanya untuk rujukan dan boleh disesuaikan mengikut keperluan.

Sila beritahu kami keperluan anda dan kami akan menyediakan penyelesaian penghantaran mikro untuk anda.

Foto Terperinci

Permohonan

Profil Syarikat

HangZhou CZPT Machinery & Electronics Co., Ltd. ditubuhkan pada tahun 2001, Kami menyediakan penyelesaian pemacu total untuk pelanggan daripada reka bentuk, fabrikasi perkakas, pembuatan komponen dan pemasangan. 

Bengkel

Peralatan Pengujian

1) Kelebihan Daya Saing

• 1) Kelebihan Daya Saing
  Pengalaman 19+ tahun dalam pembuatan kotak gear motor
  Kami menyediakan sokongan teknikal daripada penyelidikan dan pembangunan (R&D), prototaip, pengujian, pemasangan dan pengeluaran bersiri, ODM & OEM
  Harga Berdaya Saing
  Prestasi Produk: Bunyi bising rendah, Kecekapan tinggi, Jangka hayat yang panjang
  Penghantaran Segera: 15 hari bekerja selepas pembayaran
  Pesanan Kecil Diterima

 2) Produk Utama

• Kotak gear pengurangan ketepatan dan diameternya: 3.4mm-38mm, voltan: 1.5-24V, kuasa: 0.01-40W, kelajuan output: 5-2000rpm dan tork output: 1.0 gf.cm -50kgf.cm,

• Jentera transmisi cacing dan gear tersuai;
• Modul gerakan elektromekanikal yang tepat;
• Komponen dan pemasangan suntikan serbuk plastik dan logam yang tepat.

Perkhidmatan Kami

• ODM & OEM
• Reka bentuk dan pembangunan kotak gear
• Sokongan teknologi berkaitan
• Penyelesaian tersuai kotak gear pemacu mikro

Pembungkusan & Penghantaran

1) Butiran Pembungkusan

dibungkus dalam nilon terlebih dahulu, kemudian kadbod, dan kemudian diperkukuh dengan kes kayu untuk pembungkusan luar.
Atau mengikut keperluan pelanggan.

2) Butiran Penghantaran

sampel akan dihantar dalam masa 10 hari;
masa utama pesanan kelompok mengikut keadaan sebenar.

Pensijilan

Pensijilan

Kami telah lulus untuk memegang ISO9001:2015(CN11/3571), ISO14001:2004(U006616E0153R3M), ISO13485:2016(CN18/42018) dan IATF16949:2016(CN11/3571.01).

dan banyak lagi…

Soalan Lazim

Soalan Lazim

1. Bolehkah anda membuat kotak gear dengan spesifikasi tersuai?
YA. Kami mempunyai pasukan reka bentuk dan pembangunan, juga jurutera yang hebat, setiap satunya mempunyai
pengalaman kerja bertahun-tahun.

2. Adakah anda menyediakan sampel?
YA. Syarikat kami boleh menyediakan sampel kepada anda, dan masa penghantaran adalah kira-kira 5-15 hari mengikut spesifikasi kotak gear yang anda perlukan.

3. Apakah MOQ anda?
MOQ kami ialah 2000pcs. Tetapi pada permulaan perniagaan kami, kami menerima pesanan kecil.

4. Adakah anda mempunyai barang tersebut dalam stok?
Maaf kami tiada stok barang ini. Semua produk dibuat berdasarkan pesanan.

5. Adakah anda menyediakan sokongan teknologi?
YA. Syarikat kami mempunyai pasukan reka bentuk dan pembangunan, kami boleh menyediakan sokongan teknologi jika anda
keperluan.

6. Bagaimana untuk menghantar kepada kami?
Kami akan menghantar barang kepada anda mengikut akaun DHL atau UPS atau FEDEX dll yang anda berikan. 

7. Bagaimana untuk membayar wang tersebut?
Kami menerima T/T terlebih dahulu. Kami juga mempunyai akaun bank yang berbeza untuk menerima wang, seperti dolar AS atau RMB dll.

8. Bagaimanakah saya boleh tahu bahawa produk ini sesuai untuk saya?
Pertama sekali, anda perlu memberikan kami maklumat lanjut tentang produk tersebut. Kami akan mengesyorkan item tersebut kepada anda mengikut keperluan spesifikasi anda. Selepas anda mengesahkan, kami akan menyediakan sampel kepada anda. Kami juga akan menawarkan beberapa kemajuan yang baik mengikut penggunaan produk anda.

9. Bolehkah saya datang ke syarikat anda untuk melawat?
YA, anda boleh datang ke syarikat kami untuk melawat pada bila-bila masa, dan selamat datang untuk melawat syarikat kami.

10. Bagaimanakah cara untuk menghubungi kami?
 Sila hantar pertanyaan

###

###

Manfaat Motor Planet

A planetary motor has many benefits. Its compact design and low noise makes it a good choice for any application. Among its many uses, planetary gear motors are found in smart cars, consumer electronics, intelligent robots, communication equipment, and medical technology. They can even be found in smart homes! Read on to discover the benefits of a planetary gear motor. You’ll be amazed at how versatile and useful it is!

Self-centering planet gears ensure a symmetrical force distribution

A planetary motor is a machine with multiple, interlocking planetary gears. The output torque is inversely proportional to the diameters of the planets, and the transmission size has no bearing on the output torque. A torsional stress analysis of the retaining structure for this type of motor found a maximum shear stress of 64 MPa, which is equivalent to a safety factor of 3.1 for 6061 aluminum. Self-centering planet gears are designed to ensure a symmetrical force distribution throughout the transmission system, with the weakest component being the pinions.
A planetary gearbox consists of ring and sun gears. The pitch diameters of ring and planet gears are nearly equal. The number of teeth on these gears determines the average gear-ratio per output revolution. This error is related to the manufacturing precision of the gears. The effect of this error is a noise or vibration characteristic of the planetary gearbox.
Another design for a planetary gearbox is a traction-based variant. This design eliminates the need for timing marks and other restrictive assembly conditions. The design of the ring gear is similar to that of a pencil sharpener mechanism. The ring gear is stationary while planet gears extend into cylindrical cutters. When placed on the sun’s axis, the pencil sharpening mechanism revolves around the ring gear to sharpen the pencil.
The JDS eliminates the need for conventional planetary carriers and is mated with the self-centering planet gears by dual-function components. The dual-function components synchronize the rolling motion and traction of the gears. They also eliminate the need for a carrier and reduce the force distribution between the rotor and stator.

Metal gears

A planetary motor is a type of electric drive that uses a series of metal gears. These gears share a load attached to the output shaft to generate torque. The planetary motor is often CNC controlled, with extra-long shafts, which allow it to fit into very compact designs. These gears are available in sizes from seven millimeters to 12 millimeters. They can also be fitted with encoders.
Planetary gearing is widely used in various industrial applications, including automobile transmissions, off-road transmissions, and wheel drive motors. They are also used in bicycles to power the shift mechanism. Another use for planetary gearing is as a powertrain between an internal combustion engine and an electric motor. They are also used in forestry applications, such as debarking equipment and sawing. They can be used in other industries as well, such as pulp washers and asphalt mixers.
Planetary gear sets are composed of three types of gears: a sun gear, planet gears, and an outer ring. The sun gear transfers torque to the planet gears, and the planet gears mesh with the outer ring gear. Planet carriers are designed to deliver high-torque output at low speeds. These gears are mounted on carriers that are moved around the ring gear. The planet gears mesh with the ring gears, and the sun gear is mounted on a moveable carrier.
Plastic planetary gear motors are less expensive to produce than their metal counterparts. However, plastic gears suffer from reduced strength, rigidity, and load capacity. Metal gears are generally easier to manufacture and have less backlash. Plastic planetary gear motor bodies are also lighter and less noisy. Some of the largest plastic planetary gear motors are made in collaboration with leading suppliers. When buying a plastic planetary gear motor, be sure to consider what materials it is made of.

Pengekod

The Mega Torque Planetary Encoder DC Geared Motor is designed with a Japanese Mabuchi motor RS-775WC, a 200 RPM base motor. It is capable of achieving stall torque at low speeds, which is impossible to achieve with a simple DC motor. The planetary encoder provides five pulses per revolution, making it perfect for applications requiring precise torque or position. This motor requires an 8mm hex coupling for proper use.
This encoder has a high resolution and is suitable for ZGX38REE, ZGX45RGG and ZGX50RHH. It features a magnetic disc and poles and an optical disc to feed back signals. It can count paulses as the motor passes through a hall on the circuit board. Depending on the gearbox ratio, the encoder can provide up to two million transitions per rotation.
The planetary gear motor uses a planetary gear system to distribute torque in synchrony. This minimizes the risk of gear failure and increases the overall output capacity of the device. On the other hand, a spur gear motor is a simpler design and cheaper to produce. The spur gear motor works better for lower torque applications as each gear bears all the load. As such, the torque capacity of the spur gear motor is lower than that of a planetary gear motor.
The REV UltraPlanetary gearbox is designed for FTC and has three different output shaft options. The output shaft is made of 3/8-inch hex, allowing for flexible shaft replacement. These motors are a great value as they can be used to meet a wide range of power requirements. The REV UltraPlanetary gearbox and motor are available for very reasonable prices and a female 5mm hex output shaft can be used.

Durability

One of the most common questions when selecting a planetary motor is “How durable is it?” This is a question that’s often asked by people. The good news is that planetary motors are extremely durable and can last for a long time if properly maintained. For more information, read on! This article will cover the durability and efficiency of planetary gearmotors and how you can choose the best one for your needs.
First and foremost, planetary gear sets are made from metal materials. This increases their lifespan. The planetary gear set is typically made of metals such as nickel-steel and steel. Some planetary gear motors use plastic. Steel-cut gears are the most durable and suitable for applications that require more torque. Nickel-steel gears are less durable, but are better able to hold lubricant.
Durability of planetary motor gearbox is important for applications requiring high torque versus speed. VEX VersaPlanetary gearboxes are designed for FRC(r) use and are incredibly durable. They are expensive, but they are highly customizable. The planetary gearbox can be removed for maintenance and replacement if necessary. Parts for the gearbox can be purchased separately. VEX VersaPlanetary gearboxes also feature a pinion clamped onto the motor shaft.
Dynamic modeling of the planetary gear transmission system is important for understanding its durability. In previous studies, uncoupled and coupled meshing models were used to investigate the effect of various design parameters on the vibration characteristics of the planetary gear system. This analysis requires considering the role of the mesh stiffness, structure stiffness, and moment of inertia. Moreover, dynamic models for planetary gear transmission require modeling the influence of multiple parameters, such as mesh stiffness and shaft location.

Kos

The planetary gear motor has multiple contact points that help the rotor rotate at different speeds and torques. This design is often used in stirrers and large vats of liquid. This type of motor has a low initial cost and is more commonly found in low-torque applications. A planetary gear motor has multiple contact points and is more effective for applications requiring high torque. Gear motors are often found in stirring mechanisms and conveyor belts.
A planetary gearmotor is typically made from four mechanically linked rotors. They can be used for various applications, including automotive and laboratory automation. The plastic input stage gears reduce noise at higher speeds. Steel gears can be used for high torques and a modified lubricant is often added to reduce weight and mass moment of inertia. Its low-cost design makes it an excellent choice for robots and other applications.
There are many different types of planetary gear motors available. A planetary gear motor has three gears, the sun gear and planet gears, with each sharing equal amounts of work. They are ideal for applications requiring high torque and low-resistance operation, but they require more parts than their single-stage counterparts. The steel cut gears are the most durable, and are often used in applications that require high speeds. The nickel-steel gears are more absorptive, which makes them better for holding lubricant.
A planetary gear motor is a high-performance electrical vehicle motor. A typical planetary gear motor has a 3000 rpm speed, a peak torque of 0.32 Nm, and is available in 24V, 36V, and 48V power supply. It is also quiet and efficient, requiring little maintenance and offering greater torque to a modern electric car. If you are thinking of buying a planetary gear motor, be sure to do a bit of research before purchasing one.